The Complete Guide To French Cut Engagement Ring
When it comes to tying a knot, it is normal to do it in style. The French cut diamond is one of the most stylish diamonds on the market right now!
- Yes, you have so many details to think about about your wedding. But don’t forget that you are the most important part of this day.
- You need to remember that every pair of eyes is fixated on your presence. The best for you is a smile on your face and a diamond on your finger.
- And by the time you’re reading this article, you have probably clearly defined your priorities. There is no other way to find the perfect diamond ring that starts with all of the cutting manure.
- The most popular style for making French cut diamonds for centuries. This type of cut makes up most diamond crystals and lets the gemstone shine on its brightest side.
If you are thinking about the full range of price and quality of French cut diamonds, you can probably find this post that you want to know.
The beginning of the new diamond
As mentioned earlier, the French cut is one of the oldest styles of paneling from the 14th century.
This is an evolution of the style of the former known as the table cut, which shaped the first cut diamond in history.
As you can imagine, the table cut is related to the cut size. The top of the diamond is flattened in a way that resembles a regular square. In addition, there is a beveled appearance that meets at a point on all four sides of the diamond.
Cut diamonds as a result of table cutting became incredibly popular under the European royalties of the time. This is particularly the case in today’s Italy, Great Britain and France. Just as table cut diamonds became increasingly popular with the superman, so did the size of the various dimensions.
Over time, four more faces were added to the crown area of the diamond above the existing bevel. This shape was already more exclusive and intriguing, but more appeal came in the greater amount of interesting light than anyone was there to see the diamond.
- Perhaps not unexpectedly, this cut has turned into an impressive disguise style.
- The following three centuries were marked as the experimental times for achieving the perfect diamond size
- The term French cut was used for a huge popularity in France that surpassed any other country at the time.
- Europe and other parts of the world have been labeled as diamonds the same size as French cut diamonds.
Modern Cut Modern History: Today’s Art Milk Age
We know that today’s French pattern marks the beginning of the 20th century. It was available in a wide variety of cuts and combinations, although few shapes have survived to this day.
The cut reached its peak during the Art Deco period from 1910 to 1940. Therefore, it should come as no surprise to find several examples of French cut diamonds in the art and literature of the time.
This art period is known for its geometric designs and the French cut does not complement the major art and architecture of the time like any other aspect.
In the culture of that time, French-cut gemstones were used as accents on bezels, bracelets and watches.
Today there are only a few French styles that are still in fashion. Original French cut diamonds are very rare and are being replaced by modern shapes and aspects.
Properly cut and shaped diamonds are almost non-existent in regular jewelry stores. You can find them at auction, especially on antique and expensive gemstones. If you can manage to keep a living pattern from the Art Deco era, you can claim ownership of the perfect shape.
Probably the greatest drawing of the French cut is the simplicity of the cut. Because of this, you can find the tip of the small stone as part of the larger gemstone.
French cut table shutters
The traditional French thimble cut has a recognized shape. A diamond-shaped table stands on a square or rectangular crown.
Over time, the square table developed. You can come across various French styles today that are different from the traditional ones.
With that in mind, when looking for a French cut diamond for your big day, look out for all of these table sizes.
Square table (romb shape)
The square table is the most common French cut.
If you look at the diamond from above you will see four triangular directions so the hue pointing at the square angle makes it look like a star around it.
You may also find that the table is diagonal to the crown, making it a diamond. That’s why diamond-shaped and square tables are shared – they’re basically the same.
This table can be seen in the smallest gemstones. It’s convenient and easy to cut, and it can make the gemstone more spectacular.
Cut rectangular shaped table shapes (rhomboid shape)
At first glance, the square and rectangular cuts are completely different.
This is because the rectangular cut is in the shape of a thin, long and clear four-pointed star. However, there is only one difference in the cut.
The crown has a rectangular shape and that is why the table is named. Depending on the delicacy of the cut, the table can look like a rhomboid.
The geometric structure can get a little out of line when compared to cutting a square table. However, this entropic nature makes it even more attractive to some gem aficanados.
Sometimes a French section can have an octagonal table. This occurs when the four triangular directions that indicate the crown angles are more divided than usual.
This cutting technique adds a few more angles, which further improves reflection. Spreads quickly and evenly over the lightweight gemstone for an elegant shine.
The octagonal shape has become more popular recently since its introduction in the early twentieth century.
What makes Frank Cut so special?
The French cut looks clear compared to today’s popular cut. For example, reflection can be problematic for anyone looking for the ring properly.
Some generic cuts today are capable of extremely bright reflection, perhaps too much for some brides. In contrast, other cuts in the play of light are more subtle.
For example, the French cut is a perfect imbalance in terms of reflection. In addition, the shape of the table can greatly affect the degree of reflection. For example, an octagonal table gives a medium to large reflection.
Another thing is that when you put French cut diamonds together (as side diamonds) they are able to do some pretty magical optical tricks.
Above all, the adaptive geometric shape allows them to look at their home in just about any intricate jewelry design.
French cut VS. Prince Cut
If you’ve been spending some time looking for the perfect wedding ring, someone may have suggested cutting the princess
However, what’s better than French cutting?
- The truth is that the princess cut is a modern twist on the French cut. Although the French cut has an antique look, the princess cut is a brilliant stone of ultra-modern design.
- It all comes down to personal taste as one choice after another.
- There is one important difference between the two in the Princess cuts, however, which is almost always highly reflective.
- The same cannot be said of the French cut, which is known for its fine balance of dazzling sheen and underrated reflection.
Free cut diamond type
French pattern design has come a long way since it first appeared many centuries ago.
Gem cutters these days have much more advanced technology and modern tools that can cut very precisely. This allows them to experiment with a variety of cut sizes and shapes.
Although the size of the table cut is more or less the same, the dimensions are subject to any complex cutting technique.
With today’s gem cutters that allow plenty of artistic freedom, you can come across a wide variety of unfinished and dramatic French cuts.
Despite all of this, there are only four common categories of French cut gemstones on the market.
1. Hirachudi Free Cut
This French cut diamond dates from before or before the Art Deco era. Since these are extremely rare and valuable, they are rarely found in your local jewelry.
The oldest gemstones retained their unequal geometric shapes. Basically because the gem cutters didn’t come with the right-facing tools. Because of this, the directions are often cold or symmetrical
After the Great Depression in the late 2000s, many gemstones returned to the market. Most of them were time cut diamonds, but you can get French cuts here and there.
At that time, lucky and wise buyers could acquire the gems. Due to the rarity of these diamonds, the new design hardly changes or not at all. Today they are much more valuable than their modern parts.
2. Recycled cuts
Most of today’s French cut diamonds come from the recycling market.
This means that they are cut from modern diamonds that have previously been cut and polished. In most cases, you cut diamonds, baguettes, and princesses with care.
The problem with reusable cuts is that they don’t match the original cuts. Cutting processed gemstones cannot achieve the same reflection and elegance.
Once you are familiar with the durable French cut, it is easy to identify a recyclable cut. They have a deep table that protects them from previous polished gemstones. The upper bevels are flat and cannot reflect light.
3. French style per order
If you want a real French cut diamond in your wedding ring, it is best to cut per order.
Once ordered, the jeweler will cut a new diamond from scratch according to the traditional proportions and geometries of the French cut.
Of course, any gem cutter can add a unique facial touch, but even then there should be a number of constant elements.
First and foremost, there should be a high crown with a table on top, with subtle aspects in the middle. When the angles and depths are closed, the play of light is insufficient.
In total, a traditional French cut thimble should have at least 18 facets and a maximum of 24 c. Because of the large number of cuts, the gem cutter needs to be extremely accurate when taking measurements.
4. New cuts as diamonds on the side
As already mentioned, the French cut, the smallest stone cut, is particularly popular as a side stone. You can find this in your favorite engagement ring.
When platinum or diamonds are mounted in an eternal band, their shorter lengths achieve their full shine potential.
For example, you can get a ring with a heart-shaped cut on top and the required glitter with four French cut diamonds on each shoulder.
Overall, this is the easiest and most practical way to mount a French cut diamond on a piece of jewelry.
In addition, you have maximum freedom in choosing the type of tape or ring for your installation purpose. Your geometry should work with any jewelry.
Vintage engagement ring with French Cut Side Stones
The Evan Ring is an authentic vintage diamond engagement ring from the Art Deco era. The ring focuses on the precision of the GI-certified G-colored old European cut diamond with 1.22 carats, the SI1. The stone is set in a 4 elongated platinum setting with 4 French cut diamonds on each shoulder, all a mixture of around 0.40 carats.
Why we love it
Clean and classic with vibrant antique diamonds. There is a beautiful making of a beautiful face with stones in the middle. The French cut diamond gives it an Art Deco feel and the band causes a sensation with the fragile flute.
Where is the Frank cut diamond?
The difficulty of getting this diamond depends on the type you want to look for.
For example, if you want to buy a traditional French cut diamond from the Art Deco era, you may have to work harder. These gemstones are rare and may only be found in jewelry stores.
It may be better to find it on your internet than in your local stores. Look for auctions and certified online sellers who can provide documentation.
Alternatively, you can find gem cutters that can cut one or more in the right order for you. There are online stores in the US that offer this type of service. In most cases, you can specify the shape of the table, the height of the crown, etc.
If you haven’t dealt with puffiness, Quest with Recyclable Diamonds can get pretty easy and cheap. These are easy to find and available at your local jewelry store. These are cut from pre-existing polished diamonds and are widely used. You can get it on eBay and Amazon too.
After all, using French cut diamonds as the stone on the side of your ring would be a compromise. These little gems easily fit the band and are affordable.
There is something to watch out for.
Here are two links to French cut diamonds from our website:
- Bromley French Cut Ring
- Kent French Cut Ring
If you would like to see more French cut diamonds, please contact us and we will email you with more diamonds from our collection.
Famous example of new cut
Wine and antique designs are all the rage again. The 2010s were inspired by Art Deco rings in the early 20th century which, in turn, single-handedly made French pattern designs popular again.
- You can see the variety of French cut diamonds everywhere. From red carpets to billboards and catwalks. Hollywood has its own French editor for high fashion, music and specifics.
- At the turn of the decade, French cuts rose to the top after Justin Timberlake and Jessica Bill. The pop star and actor proposed with an impressive 6-carat diamond ring. The original stone was cut by a princess and decorated with precise French stones.
- A few years later, Marvin 5’s famous Adam Levine suggested Victoria’s secret model, Behati Princelu, a straight diamond from the 1920s Art Deco era. It was set in a narrow platinum band with French side-cut diamonds on each shoulder.
- Another example was in 2014 when actress Scarlett Johansson presented her Art Deco style inspired ring. His then-fiancé Roman Douriac, a French journalist, probably knew a thing or two about French editing.
- These are just some examples. Take a look around and you will see lots of French cut stones in all types of jewelry. Often as a side stone to modern diamonds.
From today’s perspective, celebrities are taking on the enthusiasm for vintage rings. We can assume that the French cut and its counterparts will have lasting strength in the near future.
The newest thought
French cut diamonds are a perfect blend of restraint and sophistication.
You can wear such a diamond as a solitaire for a more conventional style. If not, the unparalleled and adaptable nature of the French cut diamond can match any other ring.
For a finer reflection, you can mount the step ring and add a French cut on the side. The lighting is the same for lights and princess cuts.
One thing is for sure, you can’t help but make an impression when your go for a French cut. It’s a cut that confident and sophisticated women often move away from to add depth to the simplicity of things.
The simplest French cut diamonds are difficult to mark. You can rarely go wrong with them.